Planet Holds are made from a robust composite resin, creating a product which is both strong and durable. The material is tested to international standards for flexural strength, modulus and deflection whereby a bar of material is suspended between two points and subjected to a point load in the centre. All the holds have a traceable quality control stamp on the base for added peace of mind.
All holds are available in a choice of 10 vibrant colours. These are classified according to the RAL colour system to ensure maximum consistency between and within orders. All these colours are suitable for use both indoors and outside.
To maintain the holds in their optimum condition they should be pressure washed using cold water. It is not recommended that any detergents be used as over time this may have an adverse impact on the colour vibrancy of the hold.
Do not under any circumstances continue to use a hold that has cracked. If there is any doubt about the integrity of the hold, dispose of the hold immediately.
The above information and recommendations are based on our experience and are offered merely for advice. They are offered in good faith but without guarantee, as conditions and methods of use are beyond our control.
Climbing is a potentially dangerous activity that could result in injury or death. You are solely responsible to obtain proper training and instruction before usage of our products. Planet Holds is not responsible for damage, injury, loss, death or any other incurred expense from use or misuse of its products.
Site designed, built & hosted by.
Planet Holds Ltd. Registered in England.
Registration number: 05911796.
Registered Address: The charmwood Centre, Southampton Road, Bartley,Southampton, Hampshire, SO4O 2NA, United Kingdom.
VAT number: 975 9192 60
Copyright © 2008 Planet Holds Ltd. All Rights Reserved.